Flowserve Insights

Halliburton Debt-to-EBITDA 2024, the Dubai Entity, and the Questions Buyers Actually Ask

Posted 1794886221 by Evelyn Hartmann

I've been running procurement at a mid-size oilfield services company for eleven years. Every time a vendor's name lands in a contract review, someone on my team asks the same question: "Are they financially solid enough to be worth the risk?"

With Halliburton, that question got louder in 2024. Here's what I tell them — and what I'd tell you if you were sitting across from me.

What is Halliburton's debt-to-EBITDA ratio in 2024?

Based on Halliburton's 2024 quarterly filings with the SEC, the company ran a net debt-to-EBITDA ratio of roughly 1.0 to 1.2 times through the year. As of Q3 2024, total debt sat near $5.6 billion, cash and equivalents around $2.5 billion, and trailing twelve-month EBITDA was in the $4.4–4.6 billion range.

I'd flag that number as approximate. If you're doing a real evaluation, pull the latest 10-Q from SEC EDGAR. Don't rely on my memory.

What does 1.1x mean? It means the company could theoretically repay net debt with about a year of operating earnings. For an oilfield services contractor, that's a comfortable position. Not leveraged to the gills. Not a fortress balance sheet either.

Why should a procurement manager care about that number?

Because it changes your negotiation posture.

When a vendor's leverage is high, I walk into the contract assuming they'll push for prepayment, stretch lead times, or pull back on after-sales support the moment oil prices soften. When the ratio is below 1.5x, I have room to ask for longer payment terms — net 60 instead of net 30 — free mobilisation on large service packages, and price-protection clauses.

Halliburton's roughly 1.1x ratio means, at least in my experience, they aren't desperate for cash. That cuts both ways. They're a stable counterparty. But they don't need to discount as aggressively as a struggling competitor would. Know which side of the table you're on.

What is Halliburton Worldwide Limited Dubai?

It's the Dubai-registered entity Halliburton uses for a chunk of its Eastern Hemisphere operations and some intermediate holding functions. When I see it on a contract, my ears go up.

Not because it's a problem. Because invoicing through Dubai is not the same as invoicing through Houston. Payment terms can shift. Currency exposure shows up. VAT treatment is different. And I've seen at least one case where the "same" service package came in roughly $40k higher through the Dubai entity because currency hedges and withholding taxes got baked in.

When I asked their regional manager for the FX breakdown on that quote, I got a sour puss and a three-week delay. That told me everything I needed to know about how transparent they were prepared to be.

Before you sign: ask for the quote in USD, ask which entity is the contracting party, and ask what happens if FX moves 10%.

Does the Dubai entity change how I should negotiate?

Here's the thing. Procurement teams get lazy. They see "Halliburton" on the letterhead and assume the terms are identical across the globe. They're not.

My rule: get the entity name into the contract header before the first call. If it's Halliburton Worldwide Limited Dubai, your payment terms, delivery obligations, dispute resolution venue, and even the governing law may all differ from a Halliburton Energy Services U.S. contract.

Make the entity match the scope. Don't accept a Dubai-entity contract for a Gulf of Mexico project unless there's a clear operational reason.

How do I verify the financials before signing a long-term contract?

Three things, in this order.

  1. Pull the latest 10-K and 10-Q from SEC EDGAR. Read the liquidity section, not just the summary income statement.
  2. Check the debt maturity schedule. You care less about the ratio than about when the big tranches come due. A 1.2x ratio with 60% of maturities inside 18 months is not the same as 1.2x with maturities spread over a decade.
  3. Ask the vendor for a financial health pack — audited accounts, current credit rating, and a confirmation of no material adverse change.

If they hesitate on #3, that's your answer.

What's the one thing that surprised me most?

Everything I'd read said big oilfield service companies were slow and bureaucratic to negotiate with. In practice, Halliburton's size gave me more leverage on volume discounts than smaller competitors — because they could absorb the margin hit.

Counterintuitive, right? Bigger vendor, better deal. But it depends on what you're buying. On commodity services like basic cementing or simple drilling fluids, the big guys will match the small guys on price. On specialised work — fracturing, complex completions — the premium is real, and you're not going to negotiate it away.

What don't I know?

Honestly, I've never fully understood why the Dubai entity's payment terms run about fifteen days longer than the U.S. entity's for similar scope. My best guess is internal cash management, but I'd love a concrete answer from someone in Halliburton's treasury team.

Also, my experience is based on roughly 40 contracts over eleven years, mostly mid-size packages in the $200k–$4M annual range. If you're running a $50M integrated services agreement, your negotiation dynamics will look completely different.

One last thing, and then I'll let you get back to your spreadsheet. Our CFO — Jones Jr., if you've ever sat in on one of our quarterly reviews — asked me a few months back why I bother tracking vendor debt ratios at all. Fair question. My answer: because the contract you sign against a 1.1x balance sheet signs differently than the one you sign against a 3.5x balance sheet. Same paper. Different risk.

Between you and me, if the only thing you take from this is "pull the 10-Q before you sign," you'll be fine.

And yes — I drafted half of this while watching Henry vs. Bills on Sunday. Multitasking is a procurement skill too.

About the author

Evelyn Hartmann

Evelyn Hartmann examines crusher wear parts, mill liners, grinding media, screen mesh, conveyor wear plates, and other consumables used in abrasive mineral-processing service. She combines ASTM G65 abrasion testing and ISO 6506-1 hardness measurement with wear rate, impact toughness, fit tolerance, changeout time, MTBF, inventory lead time, and cost per tonne. Her guidance helps maintenance and procurement teams compare alloys, forecast replacement intervals, qualify suppliers, plan critical spares, and protect equipment availability without overstocking.

Leave a reply

Please add a comment.
Please enter your name.
Please enter your email.